{https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgiont2ejjQ6av8Hs9A4L1zezrC6zALUy2GxKT6IjXnQY2E8FFUtoi1Yq1C1kWLVlnY1Ea7vQbCPZLDUmpuK2qmodmz8teM07pJiX76xovNUVl6QSJ-vT25gR1CFsKAVy52F6OTXp84tcY2/s400/foto+cewek+cantik+terbaru+2013+(2).jpg}
Read More >>
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
By FJ40
Had to replace a crank shaft pulley on a Subaru Baja. Although some maneuvering involved to get this on through tight spaces without removing upper radiator hose, this was the right tool to hold the OEM pulley for removing the center bolt with a 22mm socket, breaker bar plus pipe. Opted to replace the OE pulley with the Grimmspeed light weight pulley that I will also review, for which this tool is necessary because the removal bolts thread into it vs. the non-threaded OEM hold holes. The Grimmspeed web site video is very helpful in explaining and demonstrating the use of the tool for this procedure.
One thing I would improve though -- the tool comes with nonmetallic washers to protect the Grimmspeed replacement alloy pulley from tool scratches during installation. Unfortunately, it is very clumsy to catch these washers when the tool is removed from the replacement pulley after it is installed (they tell you to first mount the tool to the replacement pulley before installation, so positioning the washers is not a problem at that stage). Adding some ears or tabs to the washers with which to grab them or, better still, substituting a nylon gasket with a tab would ease the washer recovery problem or facilitate attaching the tool AFTER positioning the Grimmspeed replacement pulley through the tight access.
1 of 1 people found the following review helpful.
By Alfonso G. Dubouzet
Nice tool. Easy to install. Very handy. Work perfectly with my Subaru Forester 2003. Best recommend to use it after the radiator is removed. Else the space in between the crank pulley and the radiator is really tight. Expensive for a simple too. Delivery was prompt
1 of 1 people found the following review helpful.
By Coach Steve
This tool is quite handy not only for the OEM and Grimmspeed cranks, but if you only install two bolts you can use it as a cam sprocket stabilizer; very useful. Switching between setups is a bit time consuming, but for the price, it is good for any user that doesn't change between Subaru and Grimm crank pulleys all day everyday. With this tool you will need to have an extra breaker bar (or other 1/2" drive tool).
0Awesome Comments!